10 mils and 20 mils paperback

Manufacturing steps :

These products are made by applying a backer that varies in thickness. The veneer is flexed to make the wood supple, then sanded and cut to size as per your request.

Available sizes :

4×8 to 4×12, 5×8 to 5×10 and cut to size.

Approximate thicknesses :

.22 to .30 thousandths of an inch.

Usage :

These products are really flexible which allows for a lot of different uses whether on flat lamination or a small curved surface.

Although this product is really flexible, it is important to use high-grade glue. We recommend PVA glue. It’s also important to apply strong pressure, around 100 PSI. We suggest that you use a hydraulic press but if this is not possible, the pressure should be made with a piece of wood 18 inches long by 3 inches wide and cut at a right angle. (The use of a J Rolls is prohibited).